Technical Annual Status Report (Stage I) of CLRTAP Inventory Review for Serbia

Generated by CEIP: 22 th May 2017

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols.


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

§ Stage 1: An initial check of submissions for timeliness and completeness;

§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

§ 1a Timeliness

§ 1b Format of submission

§ 1c Completeness per sector for 2015 emissions

§ 1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

§ Emissions reported under the Convention on LRTAP.


1a TIMELINESS

Date of submission of CLRTAP : 14.2.2017 , received within deadline 15.02.2017

Informative Inventory Report (IIR) : 15.3.2017 , received within deadline 15.03.2017


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

CLRTAP inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2015


1c COMPLETENESS PER SECTOR (YEAR 2015)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2015. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated.


CLRTAP (Completeness per sector for 2015):

SectorNOxNMVOCSOxNH3PM2.5PM10TSPBCCOPbCdHgAsCrCuNiSeZnDIOXPAHHCBPCB
                       
1A1b                  NE NE 
1A1c       NE              
1A2a NE  NENENENE NENENENENENENENENENENENENE
1A2b NE  NENENENE NENENENENENENENENENENENENE
1A2f    NENENENE              
1A2gvii         NE            
1A3ai(i)   NE  NE  NENENENENENENENENENENE  
1A3aii(i)   NE  NE  NENENENENENENENENENENE  
1A3bvi                    NENE
1A3bvii                    NENE
1A3c  NE      NE NENE     NE   
1A3dii   NE               NE  
1A4cii         NE            
1B1a       NE NENENENENENENENENE    
1B1b                    NENE
1B1cNENENENENENENENENENENENENENENENENENENENENENE
1B2ai  NE               NE   
1B2av  NE               NE   
1B2b  NE               NE   
1B2c   NE              NENE  
1B2dNENENE NENENENENENENE  NENENENENENENENENE
2A1NENENE     NENENENENENENENENENENENENE 
2A2NENENE     NENENENE          
2A3NENENE     NE         NENENE 
2A6NENENENENENENENENENENENENENENENENENENENENENE
2B1 NENE NE                 
2B10a         NENE NENENENENENENENENENE
2B2    NE                 
2C3 NE       NENENENENENENENENE  NE 
2C4 NE  NENE NENENENENENENENENENENENENENENE
2C7a NE      NE       NENE NENE 
2D3a    NENENE               
2D3bNE NE     NE         NENENE 
2D3cNE NE      NENENE      NENENE 
2D3e    NE                 
2D3f    NE                 
2D3gNE NE NENE NENENE NE  NE  NENENENENE
2D3h    NE                 
2D3i                NE   NENE
2H1                   NENE 
2H2    NE NENE              
2INENENE NENE NENE   NE NE       
2K         NENE NENENENENENE  NE 
2LNENENENENENENENENENENENENENENENENENENENENENE
3Da2aNENENENENENENENENENENENENENENENENENENENENENE
3Da2bNENENENENENENENENENENENENENENENENENENENENENE
3Da2cNENENENENENENENENENENENENENENENENENENENENENE
3Da3NENENENENENENENENENENENENENENENENENENENENENE
3Da4NENENENENENENENENENENENENENENENENENENENENENE
3DbNENENENENENENENENENENENENENENENENENENENENENE
3DdNENENENENENENENENENENENENENENENENENENENENENE
3DfNENENENENENENENENENENENENENENENENENENENENENE
5A   NE    NE  NE          
5C1bv       NE              
5C2NENENENENENENENENENENENENENENENENENENENENENE
5D1 NE  NENENENE NENENENENENENENENE    
5D2   NENENENENE NENENENENENENENENE    
                       
11B         NENENENENENENENENENENENE 
1A3aii(ii)   NE  NE  NENENENENENENENENENENE  
                       
59 of 136 NFR14 Sectors listed                      
Count of overall notation keys9279107103848488107103114110115117111110110113111114114124122
Count of 'NE' notation keys20242519282223252233292928272927292932303222


1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2015.


CLRTAP (Completeness of NFR Sectors from 2000 to 2015 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx32.80.025.815.920.45.00.00.0100.0
NMVOC42.10.025.818.98.05.00.00.0100.0
SOx21.60.025.819.028.65.00.00.0100.0
NH321.70.025.814.032.95.00.00.0100.0
PM2.539.60.025.821.08.75.00.00.0100.0
PM1039.60.025.816.013.25.00.00.0100.0
TSP36.60.025.817.015.75.00.00.0100.0
BC21.60.025.819.327.85.00.00.0100.0
CO24.60.025.817.227.25.00.00.0100.0
Pb17.00.025.824.027.35.00.00.0100.0
Cd19.90.025.821.028.15.00.00.0100.0
Hg15.90.025.821.032.15.00.00.0100.0
As15.10.025.821.033.55.00.00.0100.0
Cr18.40.025.820.929.85.00.00.0100.0
Cu18.40.025.822.228.15.00.00.0100.0
Ni19.10.025.820.929.05.00.00.0100.0
Se17.10.025.822.229.85.00.00.0100.0
Zn18.70.025.821.028.85.00.00.0100.0
DIOX17.00.025.824.028.25.00.00.0100.0
PAH15.40.025.823.230.65.00.00.0100.0
HCB8.30.025.824.336.65.00.00.0100.0
PCB10.50.025.816.041.75.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx29.80.025.016.023.65.00.00.0100.0
NMVOC38.20.025.019.012.65.00.00.0100.0
SOx18.80.025.019.032.65.00.00.0100.0
NH319.00.025.014.036.45.00.00.0100.0
CO20.80.025.018.030.85.00.00.0100.0
Pb16.00.025.024.029.35.00.00.0100.0
Cd17.70.025.021.030.35.00.00.0100.0
Hg14.70.025.021.033.35.00.00.0100.0
As13.00.025.021.036.05.00.00.0100.0
Cr16.00.025.021.032.35.00.00.0100.0
Cu16.00.025.023.030.35.00.00.0100.0
Ni16.40.025.021.031.65.00.00.0100.0
Se14.70.025.023.032.35.00.00.0100.0
Zn16.70.025.021.031.35.00.00.0100.0
DIOX16.00.025.024.030.05.00.00.0100.0
PAH13.00.025.024.033.05.00.00.0100.0
HCB7.00.025.025.038.05.00.00.0100.0
PCB10.00.025.016.044.05.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of National Totals from 1990 to 2015 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0
PM2.5100.00.00.00.00.00.00.00.0100.0
PM10100.00.00.00.00.00.00.00.0100.0
TSP100.00.00.00.00.00.00.00.0100.0
BC100.00.00.00.00.00.00.00.0100.0
CO100.00.00.00.00.00.00.00.0100.0
Pb100.00.00.00.00.00.00.00.0100.0
Cd100.00.00.00.00.00.00.00.0100.0
Hg100.00.00.00.00.00.00.00.0100.0
As100.00.00.00.00.00.00.00.0100.0
Cr100.00.00.00.00.00.00.00.0100.0
Cu100.00.00.00.00.00.00.00.0100.0
Ni100.00.00.00.00.00.00.00.0100.0
Se100.00.00.00.00.00.00.00.0100.0
Zn100.00.00.00.00.00.00.00.0100.0
DIOX100.00.00.00.00.00.00.00.0100.0
PAH100.00.00.00.00.00.00.00.0100.0
HCB100.00.00.00.00.00.00.00.0100.0
PCB100.00.00.00.00.00.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences