Generated by CEIP: 30 th March 2016
This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP and NECD inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols, and for EU Member States the Directive 2001/81/EC of the European Parliament and of the Council on national emission ceilings for certain atmospheric pollutants (NECD).
The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.
The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).
§ Stage 1: An initial check of submissions for timeliness and completeness;
§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;
§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.
If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at’
within two weeks of your receiving this Status Report.
STAGE I REVIEW TESTS
This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:
§ 1a Timeliness
§ 1b Format of submission
§ 1c Completeness per sector for 2014 emissions
§ 1d Completeness per pollutant of your data in the WebDab database
Data included in tests:
§ Emissions reported under the Convention on LRTAP.
§ Emissions reported under the NECD Directive to the European Commission and European Environment Agency.
Date of submission of NECD : 21.12.2015 , received within deadline 31.12.2015
Date of submission of CLRTAP : 5.2.2016 , received within deadline 15.02.2016
Informative Inventory Report (IIR) : 10.3.2016 , received within deadline 15.03.2016
Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).
NECD inventory submitted in format: NFR14 (Version 2014-1) for the years 1995 to 2014
CLRTAP inventory submitted in format: NFR14 (Version 2014-1) for the years 1995 to 2014
The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2014. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated. For NECD you can see the sector completeness not only for 2014, but also for 2013 emission data.
Sector NOx NMVOC SOx NH3 PM2.5 PM10 TSP BC CO Pb Cd Hg As Cr Cu Ni Se Zn DIOX PAH HCB PCB 1A1a NE NE 1A1b NE NE 1A1c NE NE 1A2a NE NE 1A2b NE NE 1A2c NE NE 1A2d NE NE 1A2e NE NE 1A2f NE NE 1A2gvii NE NE 1A2gviii NE NE 1A3ai(i) NE NE 1A3aii(i) NE NE 1A3bi NE NE 1A3bii NE NE 1A3biii NE NE 1A3biv NE NE 1A3bv NE NE 1A3bvi NE NE 1A3bvii NE NE 1A3c NE NE 1A3di(ii) NE NE 1A3dii NE NE 1A3ei NE NE 1A3eii NE NE 1A4ai NE NE 1A4aii NE NE 1A4bi NE NE 1A4bii NE NE 1A4ci NE NE 1A4cii NE NE 1A4ciii NE NE 1A5a NE NE 1A5b NE NE 1B1a NE NE 1B1b NE NE 1B1c NE NE 1B2ai NE NE 1B2aiv NE NE 1B2av NE NE 1B2b NE NE 1B2c NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 1B2d NE NE 2A1 NE NE 2A2 NE NE 2A3 NE NE 2A5a NE NE 2A5b NE NE 2A5c NE NE 2A6 NE NE 2B1 NE NE 2B10a NE NE 2B10b NE NE 2B2 NE NE 2B3 NE NE 2B5 NE NE 2B6 NE NE 2B7 NE NE 2C1 NE NE 2C2 NE NE 2C3 NE NE 2C4 NE NE 2C5 NE NE 2C6 NE NE 2C7a NE NE 2C7b NE NE 2C7c NE NE 2C7d NE NE 2D3a NE NE 2D3b NE NE NE 2D3c NE NE 2D3d NE NE 2D3e NE NE 2D3f NE NE 2D3g NE NE 2D3h NE NE 2D3i NE NE 2G NE NE 2H1 NE NE 2H2 NE NE 2H3 NE NE 2I NE NE 2J NE NE 2K NE NE 2L NE NE 3B1a NE NE 3B1b NE NE 3B2 NE NE 3B3 NE NE 3B4a NE NE 3B4d NE NE 3B4e NE NE 3B4f NE NE 3B4gi NE NE 3B4gii NE NE 3B4giii NE NE 3B4giv NE NE 3B4h NE NE 3Da1 NE NE 3Da2a NE NE 3Da2b NE NE 3Da2c NE NE 3Da3 NE NE 3Da4 NE NE 3Db NE NE 3Dc NE NE 3Dd NE NE 3De NE NE 3Df NE NE 3F NE NE 3I NE NE 5A NE NE 5B1 NE NE 5B2 NE NE 5C1a NE NE 5C1bi NE NE 5C1bii NE NE 5C1biii NE NE 5C1biv NE NE 5C1bv NE NE 5C1bvi NE NE 5C2 NE NE 5D1 NE NE 5D2 NE NE 5D3 NE NE 5E NE NE 6A NE NE 11A NE NE 11B NE NE 11C NE NE 1A3 NE NE 1A3ai(ii) NE NE 1A3aii(ii) NE NE 1A3di(i) NE NE 1A5c NE NE 6B NE NE 136 of 136 NFR14 Sectors listed Count of overall notation keys 95 82 103 114 82 81 77 136 96 109 107 114 114 111 107 106 136 115 100 113 116 116 Count of 'NE' notation keys 1 2 1 0 1 1 1 136 0 1 1 1 1 1 1 1 136 1 0 0 0 0
|
2014
|
2013
|
The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):
All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2014.
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM10 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 TSP 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 BC 0.0 0.0 0.0 100.0 0.0 0.0 0.0 0.0 100.0 CO 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 As 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cr 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cu 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Ni 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Se 0.0 0.0 0.0 100.0 0.0 0.0 0.0 0.0 100.0 Zn 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 HCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 28.0 0.0 1.0 1.0 64.0 5.0 0.0 0.0 100.0 NMVOC 39.0 0.0 1.0 1.0 55.0 3.0 0.0 0.0 100.0 SOx 22.0 0.0 1.0 1.0 72.0 3.0 0.0 0.0 100.0 NH3 16.0 0.0 1.0 0.0 80.0 2.0 0.0 0.0 100.0 CO 27.0 0.0 1.0 1.0 67.0 2.0 0.0 0.0 100.0 Pb 19.0 1.0 1.0 1.0 74.0 4.0 0.0 0.0 100.0 Cd 20.0 1.0 1.0 1.0 73.0 4.0 0.0 0.0 100.0 Hg 14.0 1.0 1.0 1.0 78.0 4.0 0.0 0.0 100.0 As 14.0 1.0 1.0 1.0 79.0 4.0 0.0 0.0 100.0 Cr 17.0 1.0 1.0 1.0 76.0 4.0 0.0 0.0 100.0 Cu 19.0 1.0 1.0 1.0 74.0 3.0 0.0 0.0 100.0 Ni 20.0 1.0 1.0 1.0 75.0 2.0 0.0 0.0 100.0 Se 0.0 0.0 0.0 100.0 0.0 0.0 0.0 0.0 100.0 Zn 13.0 1.0 1.0 1.0 84.0 0.0 0.0 0.0 100.0 DIOX 25.0 0.0 1.0 0.0 73.0 1.0 0.0 0.0 100.0 PAH 17.0 0.0 1.0 0.0 81.0 1.0 0.0 0.0 100.0 HCB 14.0 0.0 1.0 0.0 85.0 0.0 0.0 0.0 100.0 PCB 14.0 0.0 1.0 0.0 85.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 29.3 0.0 1.0 1.0 63.0 4.7 0.0 0.0 100.0 NMVOC 40.0 0.0 1.0 1.0 54.0 3.0 0.0 0.0 100.0 SOx 23.3 0.0 1.0 1.0 71.0 2.7 0.0 0.0 100.0 NH3 16.0 0.0 1.0 0.0 80.0 2.0 0.0 0.0 100.0 PM2.5 39.3 0.0 1.0 1.0 56.7 2.0 0.0 0.0 100.0 PM10 40.3 0.0 1.0 1.0 56.0 2.0 0.0 0.0 100.0 TSP 42.9 0.0 1.0 1.0 53.0 2.0 0.0 0.0 100.0 BC 0.0 0.0 0.0 100.0 0.0 0.0 0.0 0.0 100.0 CO 28.3 0.0 1.0 0.9 67.0 2.0 0.0 0.0 100.0 Pb 19.0 1.0 1.0 1.0 73.0 4.0 0.0 0.0 100.0 Cd 20.9 1.0 1.0 1.0 72.1 4.0 0.0 0.0 100.0 Hg 15.0 1.0 1.0 1.0 77.1 4.0 0.0 0.0 100.0 As 15.0 1.0 1.0 1.0 79.0 4.0 0.0 0.0 100.0 Cr 17.3 1.0 1.0 1.0 75.7 4.0 0.0 0.0 100.0 Cu 20.0 1.0 1.0 1.0 73.0 3.0 0.0 0.0 100.0 Ni 21.0 1.0 1.0 1.0 74.0 2.0 0.0 0.0 100.0 Se 0.0 0.0 0.0 100.0 0.0 0.0 0.0 0.0 100.0 Zn 14.0 1.0 1.0 1.0 83.0 0.0 0.0 0.0 100.0 DIOX 26.0 0.0 1.0 0.0 72.0 1.0 0.0 0.0 100.0 PAH 17.0 0.0 1.0 0.0 81.0 1.0 0.0 0.0 100.0 HCB 14.6 0.0 1.0 0.0 84.0 0.0 0.0 0.0 100.0 PCB 15.0 0.0 1.0 0.0 84.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 29.4 0.0 1.0 0.0 61.6 6.6 0.0 0.0 99.0 NMVOC 40.0 0.0 3.0 1.0 50.0 4.0 0.0 0.0 99.0 SOx 23.4 0.0 1.0 1.0 68.6 4.6 0.0 0.0 99.0 NH3 16.0 0.0 1.0 0.0 78.0 4.0 0.0 0.0 99.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences