Generated by CEIP: 28 th February 2024
This status report has been prepared by the EMEP Centre on Emission Inventories and Projections (CEIP). The Status Report provides information based on the initial checks of the inventories submitted in accordance with the reporting requirements of the UNECE Air Convention (CLRTAP) and its protocols.
The technical review of national inventories involves the checking and assessment of national data submissions with the aim of improving the quality of emission data and related information.
The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP: Updated methods and procedures for the technical review of air pollutant emission inventories reported under the Convention ( ECE/EB.AIR/142/Add.1 ).
§ Stage 1: An initial check of the submissions for timeliness and completeness;
§ Stage 2: A synthesis and assessment of all national submissions for consistency and comparability of data with recommendations for data quality improvement;
§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, in accordance with the workplan agreed by the Executive Body.
If you have any comments on the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at’
within two weeks of receiving this Status Report.
STAGE 1 REVIEW TESTS
This Stage 1 Status Report documents the assessesment of the timeliness, completeness, and format of the submitted national inventories. It provides countries with the results of these initial automated checks and supports the subsequent Stage 2 and Stage 3 review process. Stage 1 tests are:
§ 1a Timeliness
§ 1b Format of submission
§ 1c Completeness per sector for 2022 emissions
§ 1d Completeness per pollutant of your data in the WebDab database
Data included in tests:
§ Emissions reported under the Air Convention (CLRTAP).
Date of submission : 14.02.2024 , received within deadline 15.02.2024
Parties are invited to check the consistency of the format via RepDab (https://www.ceip.at/repdab) before submitting their air emission inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted have been reported in the Nomenclature for Reporting and the files have been formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard reporting format is the NFR19 format. Reporting templates can be downloaded from the CEIP website (https://www.ceip.at/reporting-instructions/annexes-to-the-2023-reporting-guidelines).
Air emission inventory submitted in format: NFR19 (Version 2019-1) for the years 1990 to 2022
The table below lists all sectors where the notation key 'Not Estimated (NE)' was reported for the year 2022. At the end of the table there is a statistic on how many notation keys have been reported in general per pollutant and a count of the not estimated sectors per pollutant. If nothing is reported at all for a particular pollutant listed in the tables this is also indicated.
Sector NOx NMVOC SOx NH3 PM2.5 PM10 TSP BC CO Pb Cd Hg As Cr Cu Ni Se Zn DIOX PAH HCB PCB 1A1b NE 1A2a NE 1A2c NE NE 1A2d NE NE 1A2e NE 1A2gvii NE NE 1A3ai(i) NE NE 1A3aii(i) NE NE NE NE NE NE NE NE NE 1A3bi NE 1A3bii NE 1A3biii NE 1A3biv NE 1A3bv NE NE NE 1A3bvi NE NE NE 1A3bvii NE NE NE NE NE NE NE NE NE NE NE NE 1A3c NE NE 1A3di(ii) NE NE 1A3dii NE NE 1A4aii NE NE 1A4bii NE NE 1A4cii NE NE 1A5b NE NE 1B1a NE NE NE NE NE NE NE NE NE NE NE 1B2ai NE NE 1B2aiv NE NE 1B2av NE NE 1B2b NE NE 1B2c NE NE NE NE NE NE NE NE NE NE 2C1 NE 2C3 NE NE 2C5 NE NE NE 2C7a NE NE NE NE NE NE 2D3b NE NE NE NE NE NE 2D3c NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 3Da2a NE NE NE 3Da2b NE NE NE 3Da2c NE NE NE 3Da3 NE NE NE 3Da4 NE NE NE 3Db NE NE NE NE 3Dd NE 3De NE NE NE NE NE NE NE NE NE NE NE NE 3Df NE NE NE NE NE NE NE NE NE NE NE NE 3I NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 6A NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 11B NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 1A3ai(ii) NE NE NE NE NE NE NE NE NE NE NE NE 1A3aii(ii) NE NE NE NE NE NE NE NE NE NE NE 48 of 135 Sectors listed Count of overall notation keys 78 58 97 74 70 70 67 99 94 93 98 99 98 98 96 95 101 95 102 97 122 121 Count of 'NE' notation keys 7 6 10 9 12 12 10 7 7 10 13 14 12 13 12 12 12 9 14 6 27 17
The evaluation of the completeness of data in the WebDab database was based on the criteria outlined in the 2023 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):
The figures in the table show the proportion of cells in the reporting template for each component and time series, expressed as a percentage of the total number of reporting template cells. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of reported values is less than 10%. The completeness of NFR Sectors is divided into two sections: 1990 to 1999 and 2000 to 2022.
Component %Value %0 %NO %NE %NA %IE %C %NR %All NOx 41.7 0.0 9.0 5.0 24.4 20.0 0.0 0.0 100.0 NMVOC 56.8 0.0 9.0 5.0 13.0 17.0 0.0 0.0 100.0 SOx 28.0 0.0 9.0 7.0 35.5 20.0 0.0 0.0 100.0 NH3 46.4 0.0 9.0 5.6 22.2 17.2 0.0 0.0 100.0 PM2.5 51.0 0.0 9.0 7.9 13.1 19.7 0.0 0.0 100.0 PM10 51.0 0.0 9.0 7.9 13.1 19.7 0.0 0.0 100.0 TSP 52.0 0.0 9.0 7.0 13.2 19.6 0.0 0.0 100.0 BC 27.9 0.0 9.0 5.2 38.7 19.9 0.0 0.0 100.0 CO 28.5 0.0 9.0 5.0 39.1 19.0 0.0 0.0 100.0 Pb 30.7 0.0 9.0 6.9 38.3 15.9 0.0 0.0 100.0 Cd 29.4 0.0 9.0 8.0 38.7 15.7 0.0 0.0 100.0 Hg 27.7 0.0 9.0 9.0 39.0 16.4 0.0 0.0 100.0 As 28.5 0.0 9.0 7.1 39.4 16.9 0.0 0.0 100.0 Cr 28.1 0.0 9.0 8.0 39.2 15.9 0.0 0.0 100.0 Cu 30.7 0.0 9.0 7.0 38.0 15.9 0.0 0.0 100.0 Ni 29.6 0.0 9.0 7.0 39.2 15.7 0.0 0.0 100.0 Se 25.7 0.0 9.0 7.0 42.3 16.9 0.0 0.0 100.0 Zn 30.5 0.0 9.0 5.4 40.2 15.9 0.0 0.0 100.0 DIOX 24.2 0.0 9.0 10.2 39.1 17.4 0.0 0.0 100.0 PAH 28.3 0.0 9.0 4.3 42.0 17.0 0.0 0.0 100.0 HCB 9.0 0.0 9.0 19.1 46.1 17.0 0.0 0.0 100.0 PCB 10.3 0.0 9.0 11.6 54.0 16.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In some cases, due to rounding, the total percentage may not exactly equal the sum of other columns
Component %Value %0 %NO %NE %NA %IE %C %NR %All NOx 42.8 0.0 9.0 5.0 24.2 20.0 0.0 0.0 100.0 NMVOC 56.9 0.0 9.0 5.0 13.5 16.1 0.0 0.0 100.0 SOx 27.8 0.0 9.0 7.0 36.1 20.0 0.0 0.0 100.0 NH3 44.6 0.0 9.0 6.6 22.4 17.5 0.0 0.0 100.0 CO 28.2 0.0 9.0 5.0 39.7 19.0 0.0 0.0 100.0 Pb 31.8 0.0 9.0 7.0 37.2 15.1 0.0 0.0 100.0 Cd 30.0 0.0 9.0 7.4 38.7 15.1 0.0 0.0 100.0 Hg 28.2 0.0 9.0 9.0 38.8 16.0 0.0 0.0 100.0 As 28.9 0.0 9.0 7.1 39.8 15.5 0.0 0.0 100.0 Cr 28.4 0.0 9.0 8.0 39.6 15.1 0.0 0.0 100.0 Cu 31.0 0.0 9.0 7.0 38.5 15.1 0.0 0.0 100.0 Ni 28.6 0.0 9.0 7.0 40.4 15.1 0.0 0.0 100.0 Se 25.8 0.0 9.0 7.0 42.9 16.1 0.0 0.0 100.0 Zn 31.2 0.0 9.0 6.0 39.6 15.1 0.0 0.0 100.0 DIOX 26.3 0.0 9.0 9.2 37.2 18.4 0.0 0.0 100.0 PAH 33.0 0.0 9.0 4.3 38.9 15.6 0.0 0.0 100.0 HCB 9.9 0.0 9.0 18.1 46.0 17.0 0.0 0.0 100.0 PCB 11.8 0.0 9.0 10.6 53.6 16.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In some cases, due to rounding, the total percentage may not exactly equal the sum of other columns
Component %Value %0 %NO %NE %NA %IE %C %NR %All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM10 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 TSP 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 BC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 CO 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 As 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cr 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cu 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Ni 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Se 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Zn 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 HCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In some cases, due to rounding, the total percentage may not exactly equal the sum of other columns
Component %Value %0 %NO %NE %NA %IE %C %NR %All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 As 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cr 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cu 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Ni 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Se 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Zn 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 HCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In some cases, due to rounding, the total percentage may not exactly equal the sum of other columns