Technical Annual Status Report (Stage I) of CLRTAP and NECD Inventory Review for the Netherlands

Generated by CEIP: 27 th March 2015

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP and NECD inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols, and for EU Member States the Directive 2001/81/EC of the European Parliament and of the Council on national emission ceilings for certain atmospheric pollutants (NECD).


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

§ Stage 1: An initial check of submissions for timeliness and completeness;

§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

§ 1a Timeliness

§ 1b Format of submission

§ 1c Completeness per sector for 2013 emissions

§ 1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

§ Emissions reported under the Convention on LRTAP.

§ Emissions reported under the NECD Directive to the European Commission and European Environment Agency.


1a TIMELINESS

Date of submission of NECD : 31.12.2014 , received within deadline 31.12.2014

Date of submission of CLRTAP : 15.2.2015 , received within deadline 15.02.2015

Informative Inventory Report (IIR) : 15.3.2015 , received within deadline 15.03.2015


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

NECD inventory submitted in format: NFR14 (Version 2014-1) for the years 2012 and 2013

CLRTAP inventory submitted in format: NFR14 (Version 2014-1) for the years 1990 to 2013; Projections for the years 2020 and 2030


1c COMPLETENESS PER SECTOR (YEAR 2013)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2013. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated. For NECD you can see the sector completeness not only for 2013, but also for 2012 emission data.


CLRTAP (Completeness per sector for 2013):

SectorNOxNMVOCSOxNH3PM2.5PM10TSPBCCOPbCdHgAsCrCuNiSeZnDIOXPAHHCBPCB
                       
2B2NE                     
3B1a NE                    
3B1b NE                    
3B2 NE                    
3B3 NE                    
3B4a NE                    
3B4d NE                    
3B4e NE                    
3B4f NE     NE              
3B4gi NE                    
3B4gii NE                    
3B4giii NE                    
3B4giv NE                    
3Da3 NE                    
5A   NE                  
5C1bv NE                    
                       
1A3   NE  NENE  NENENENENENENENENENENENE
1A3ai(ii)NENENENENENENENENENENENENENENENENENENENENENE
1A3aii(ii)NENENENENENENENENENENENENENENENENENENENENENE
1A5cNENENENENENENENENENENENENENENENENENENENENENE
6BNENENENENENENENENENENENENENENENENENENENENENE
                       
21 of 136 NFR14 Sectors listed                      
Count of overall notation keys92851018479807985101112115117118112109111124108106108129136
Count of 'NE' notation keys51846445644555555555555


NECD (Completeness per sector for 2013 and 2012):

2013

SectorNOxNMVOCSOxNH3
     
2B2NE   
3B1a NE  
3B1b NE  
3B2 NE  
3B3 NE  
3B4a NE  
3B4d NE  
3B4e NE  
3B4f NE  
3B4gi NE  
3B4gii NE  
3B4giii NE  
3B4giv NE  
3Da3 NE  
5A   NE
5C1bv NE  
     
1A3   NE
1A3ai(ii)NENENENE
1A3aii(ii)NENENENE
1A5cNENENENE
6BNENENENE
     
21 of 136 NFR14 Sectors listed    
Count of overall notation keys918510190
Count of 'NE' notation keys51846

2012

SectorNOxNMVOCSOxNH3
     
2B2NE   
3B1a NE  
3B1b NE  
3B2 NE  
3B3 NE  
3B4a NE  
3B4d NE  
3B4e NE  
3B4f NE  
3B4gi NE  
3B4gii NE  
3B4giii NE  
3B4giv NE  
3Da3 NE  
5A   NE
5C1bv NE  
     
1A3   NE
1A3ai(ii)NENENENE
1A3aii(ii)NENENENE
1A5cNENENENE
6BNENENENE
     
21 of 136 NFR14 Sectors listed    
Count of overall notation keys928410290
Count of 'NE' notation keys51846


1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2013.


CLRTAP (Completeness of National Totals from 1990 to 2013 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0
PM2.5100.00.00.00.00.00.00.00.0100.0
PM10100.00.00.00.00.00.00.00.0100.0
TSP100.00.00.00.00.00.00.00.0100.0
BC100.00.00.00.00.00.00.00.0100.0
CO100.00.00.00.00.00.00.00.0100.0
Pb100.00.00.00.00.00.00.00.0100.0
Cd100.00.00.00.00.00.00.00.0100.0
Hg100.00.00.00.00.00.00.00.0100.0
As100.00.00.00.00.00.00.00.0100.0
Cr100.00.00.00.00.00.00.00.0100.0
Cu100.00.00.00.00.00.00.00.0100.0
Ni100.00.00.00.00.00.00.00.0100.0
Se100.00.00.00.00.00.00.00.0100.0
Zn100.00.00.00.00.00.00.00.0100.0
DIOX100.00.00.00.00.00.00.00.0100.0
PAH100.00.00.00.00.00.00.00.0100.0
HCB100.00.00.00.00.00.00.00.0100.0
PCB20.879.20.00.00.00.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx33.01.035.94.017.69.00.00.0100.0
NMVOC37.50.030.213.011.77.00.00.0100.0
SOx24.40.444.33.024.04.00.00.0100.0
NH335.11.040.64.015.64.00.00.0100.0
CO24.60.058.73.010.04.00.00.0100.0
Pb21.40.362.33.011.71.00.00.0100.0
Cd18.50.265.54.010.81.00.00.0100.0
Hg13.20.169.94.011.71.00.00.0100.0
As17.00.366.04.011.71.00.00.0100.0
Cr20.20.063.14.011.71.00.00.0100.0
Cu22.50.161.74.010.01.00.00.0100.0
Ni20.90.363.34.010.11.00.00.0100.0
Se11.90.171.94.010.81.00.00.0100.0
Zn23.10.161.14.010.01.00.00.0100.0
DIOX20.10.868.24.05.71.00.00.0100.0
PAH27.60.063.34.04.01.00.00.0100.0
HCB6.50.084.54.04.01.00.00.0100.0
PCB0.20.090.84.04.01.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 2000 to 2013 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx32.00.737.44.017.89.00.00.0100.0
NMVOC38.90.029.613.011.07.00.00.0100.0
SOx25.00.044.33.024.04.00.00.0100.0
NH337.90.738.84.015.04.00.00.0100.0
PM2.541.60.843.63.07.04.00.00.0100.0
PM1041.60.843.63.07.04.00.00.0100.0
TSP41.60.742.94.07.04.00.00.0100.0
BC13.024.645.04.09.04.00.00.0100.0
CO25.40.058.63.010.04.00.00.0100.0
Pb19.00.064.73.012.01.00.00.0100.0
Cd16.10.367.44.011.01.00.00.0100.0
Hg12.30.470.54.012.01.00.00.0100.0
As14.10.068.94.012.01.00.00.0100.0
Cr18.70.064.34.012.01.00.00.0100.0
Cu21.30.062.94.010.01.00.00.0100.0
Ni20.10.064.14.010.41.00.00.0100.0
Se8.90.774.44.010.91.00.00.0100.0
Zn21.00.063.34.010.01.00.00.0100.0
DIOX20.10.967.64.05.91.00.00.0100.0
PAH23.00.067.24.04.01.00.00.0100.0
HCB5.20.085.84.04.01.00.00.0100.0
PCB0.20.090.84.04.01.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences



-------------

NECD (Completeness of National Totals from 2001 to 2013 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


NECD (Completeness of NFR Sectors from 2001 to 2013 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx34.40.027.24.021.412.40.00.0100.0
NMVOC44.40.019.413.812.010.40.00.0100.0
SOx27.70.031.52.230.88.20.00.0100.0
NH335.80.024.85.725.18.40.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences