Technical Annual Status Report (Stage I) of CLRTAP Inventory Review for Montenegro

Generated by CEIP: 14 th March 2009

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols.


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: ‘ Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ’ ( ECE/EB.AIR/GE.1/2007/16 ).

§ Stage 1: An initial check of submissions for timeliness and completeness;

§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘ emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

§ 1a Timeliness

§ 1b Format of submission

§ 1c Completeness per sector for 2007 emissions

§ 1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

§ Emissions reported under the Convention on LRTAP up until: 14 th March 2009


1a TIMELINESS

Date of submission of CLRTAP : Not received!

Informative Inventory Report (IIR): Not received yet (Parties are encouraged to submit an IIR no later than 3 months after submitting their emissions data)


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab ( http://www.ceip.at/reporting-instructions/repdab ) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting (NFR) and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data.

CLRTAP inventory submitted in format: Not received!


1c COMPLETENESS PER SECTOR (YEAR 2007 EMISSIONS)

An X in the tables below shows for which sectors you have reported Not Estimated (NE) in the 2007 emission data (priority pollutants included). Sectors where you have reported only notation keys are flagged .


CLRTAP (Completeness per sector for 2007):

No data received!


1d COMPLETENESS PER POLLUTANT

The completeness of your data in the WebDab database of priority pollutants has been evaluated on the basis of the criteria outlined in 2002 Guidelines for Estimating and Reporting Emission Data under CLRTAP (ECE/EB.AIR/80, Air Pollution Studies series, No. 15):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the total number of cells containing a value or notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported in cells and/or if the number of values reported is less than 10%.


CLRTAP (Completeness for National Totals including NFR02, NFR08 and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
SOx0.00.00.00.00.00.00.00.00.0
NOx0.00.00.00.00.00.00.00.00.0
NH30.00.00.00.00.00.00.00.00.0
NMVOC0.00.00.00.00.00.00.00.00.0
CO0.00.00.00.00.00.00.00.00.0
DIOX0.00.00.00.00.00.00.00.00.0
PAH0.00.00.00.00.00.00.00.00.0
HCB0.00.00.00.00.00.00.00.00.0
Pb0.00.00.00.00.00.00.00.00.0
Hg0.00.00.00.00.00.00.00.00.0
Cd0.00.00.00.00.00.00.00.00.0
PM2.50.00.00.00.00.00.00.00.00.0
PM100.00.00.00.00.00.00.00.00.0
TSP0.00.00.00.00.00.00.00.00.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR02 and NFR08 sectors without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
SOx0.00.00.00.00.00.00.00.00.0
NOx0.00.00.00.00.00.00.00.00.0
NH30.00.00.00.00.00.00.00.00.0
NMVOC0.00.00.00.00.00.00.00.00.0
CO0.00.00.00.00.00.00.00.00.0
DIOX0.00.00.00.00.00.00.00.00.0
PAH0.00.00.00.00.00.00.00.00.0
HCB0.00.00.00.00.00.00.00.00.0
Pb0.00.00.00.00.00.00.00.00.0
Hg0.00.00.00.00.00.00.00.00.0
Cd0.00.00.00.00.00.00.00.00.0
PM2.50.00.00.00.00.00.00.00.00.0
PM100.00.00.00.00.00.00.00.00.0
TSP0.00.00.00.00.00.00.00.00.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences