Generated by CEIP: 19 th April 2018
This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP and NECD inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols, and for EU Member States the Directive 2001/81/EC of the European Parliament and of the Council on national emission ceilings for certain atmospheric pollutants (NECD).
The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.
The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).
§ Stage 1: An initial check of submissions for timeliness and completeness;
§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;
§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.
If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at’
within two weeks of your receiving this Status Report.
STAGE I REVIEW TESTS
This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:
§ 1a Timeliness
§ 1b Format of submission
§ 1c Completeness per sector for 2016 emissions
§ 1d Completeness per pollutant of your data in the WebDab database
Data included in tests:
§ Emissions reported under the Convention on LRTAP.
§ Emissions reported under the NECD Directive to the European Commission and European Environment Agency.
Date of submission of NECD : 23.1.2018 , received within deadline 15.02.2018 (Resubmission: 7.3.2018)
Date of submission of CLRTAP : 23.1.2018 , received within deadline 15.02.2018
Date of resubmission of CLRTAP : 7.3.2018 , received within deadline 15.03.2018
Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).
NECD inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2016
CLRTAP inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2016
The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2016. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated. For NECD you can see the sector completeness not only for 2016, but also for 2010 and 2005 emission data.
Sector NOx NMVOC SOx NH3 PM2.5 PM10 TSP BC CO Pb Cd Hg As Cr Cu Ni Se Zn DIOX PAH HCB PCB 1A1b NE NE 1A1c NE NE 1A2gvii NE NE NE NE 1A3ai(i) NE NE NE NE NE 1A3aii(i) NE NE NE NE NE 1A3bvi NE NE NE 1A3bvii NE NE NE NE NE NE NE NE NE NE 1A3c NE NE NE 1A3ei NE NE NE NE NE NE NE NE NE NE NE 1A4ai NE NE 1A4bi NE 1A4ci NE NE 1A4cii NE NE NE NE 1B1a NE NE NE NE NE NE NE NE NE NE 1B1b NE NE NE NE NE NE NE NE NE NE 1B2ai NE NE 1B2aiv NE 1B2av NE NE 1B2b NE NE 1B2c NE NE NE 2A1 NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 2A2 NE NE NE NE NE NE NE 2A3 NE NE NE NE NE NE 2B1 NE 2B10a NE NE NE NE NE NE NE NE NE NE NE NE 2B2 NE 2B5 NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 2B6 NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 2C1 NE 2C2 NE NE NE NE NE NE NE 2C3 NE NE NE NE NE NE NE NE 2C5 NE NE NE NE NE NE NE NE NE NE NE NE 2C7d NE NE NE 2D3a NE 2D3b NE NE NE NE NE NE 2D3c NE NE NE NE NE NE NE 2D3e NE 2D3f NE 2D3g NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 2D3h NE NE 2D3i NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 2G NE NE NE 2H1 NE NE NE 2H2 NE NE NE NE 2I NE NE NE NE NE NE NE NE NE NE 2J NE NE NE NE NE NE NE 2K NE NE NE NE NE NE NE NE NE NE NE 3Da4 NE 3De NE 5A NE NE 5B1 NE NE NE NE NE NE NE NE 5B2 NE NE NE NE NE NE NE NE NE NE NE NE 5C1biv NE NE 5C1bv NE 5C2 NE NE NE NE NE 5D1 NE NE NE NE NE NE NE NE NE NE NE 5D2 NE NE NE NE NE NE NE NE NE NE NE 5D3 NE NE NE NE NE NE NE NE NE NE NE NE NE NE 5E NE NE NE NE 11A NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 11B NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 1A3ai(ii) NE NE NE NE NE 1A3aii(ii) NE NE NE NE NE 63 of 136 NFR14 Sectors listed Count of overall notation keys 72 64 90 86 64 64 63 86 86 103 98 106 105 98 98 98 103 96 105 96 121 119 Count of 'NE' notation keys 15 14 16 27 15 9 8 15 13 27 21 30 26 19 19 18 23 17 25 16 23 10
|
2016
|
2010
|
2005
|
The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):
All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2016.
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 47.4 0.0 10.1 11.0 25.1 6.4 0.0 0.0 100.0 NMVOC 53.5 0.0 10.1 10.0 20.1 6.4 0.0 0.0 100.0 SOx 33.6 0.0 10.1 12.8 39.0 5.4 0.0 0.0 100.0 NH3 36.2 0.0 10.1 20.9 27.0 6.4 0.0 0.0 100.0 PM2.5 53.1 0.0 10.1 11.4 18.1 7.6 0.0 0.0 100.0 PM10 53.1 0.0 10.1 7.0 22.1 7.6 0.0 0.0 100.0 TSP 54.4 0.0 10.1 6.0 22.1 7.6 0.0 0.0 100.0 BC 36.2 0.0 10.2 10.9 36.1 6.4 0.0 0.0 100.0 CO 37.4 0.0 10.1 10.0 38.1 5.4 0.0 0.0 100.0 Pb 24.2 0.0 10.1 19.9 40.4 5.4 0.0 0.0 100.0 Cd 29.2 0.0 10.1 15.2 40.8 5.4 0.0 0.0 100.0 Hg 22.5 0.0 10.1 21.9 40.1 5.4 0.0 0.0 100.0 As 23.4 0.0 10.1 19.0 41.9 5.4 0.0 0.0 100.0 Cr 28.5 0.0 10.1 13.9 42.1 5.4 0.0 0.0 100.0 Cu 28.5 0.0 10.1 14.0 41.9 5.4 0.0 0.0 100.0 Ni 27.6 0.0 10.1 13.9 42.9 5.4 0.0 0.0 100.0 Se 24.2 0.0 10.1 17.6 42.9 5.4 0.0 0.0 100.0 Zn 29.2 0.0 10.1 13.2 42.1 5.4 0.0 0.0 100.0 DIOX 23.4 0.0 10.1 18.9 43.1 5.4 0.0 0.0 100.0 PAH 29.4 0.0 10.1 12.8 43.1 5.4 0.0 0.0 100.0 HCB 11.9 0.0 10.1 16.4 56.1 5.4 0.0 0.0 100.0 PCB 13.4 0.0 10.1 7.0 64.1 5.4 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 47.9 0.0 11.0 11.0 25.1 4.0 0.0 0.0 100.0 NMVOC 55.0 0.0 11.0 10.0 20.0 4.0 0.0 0.0 100.0 SOx 35.0 0.0 11.0 12.0 39.0 4.0 0.0 0.0 100.0 NH3 33.0 0.0 11.0 23.9 28.0 4.0 0.0 0.0 100.0 CO 38.0 0.0 11.0 10.0 38.0 4.0 0.0 0.0 100.0 Pb 25.0 0.0 11.0 19.0 41.0 4.0 0.0 0.0 100.0 Cd 31.0 0.0 11.0 14.0 40.0 4.0 0.0 0.0 100.0 Hg 24.0 0.0 11.0 21.0 40.0 4.0 0.0 0.0 100.0 As 24.0 0.0 11.0 19.0 41.0 4.0 0.0 0.0 100.0 Cr 30.0 0.0 11.0 13.0 42.0 4.0 0.0 0.0 100.0 Cu 30.0 0.0 11.0 14.0 41.0 4.0 0.0 0.0 100.0 Ni 29.0 0.0 11.0 14.0 42.0 4.0 0.0 0.0 100.0 Se 25.0 0.0 11.0 18.0 42.0 4.0 0.0 0.0 100.0 Zn 30.0 0.0 11.0 13.0 42.0 4.0 0.0 0.0 100.0 DIOX 24.0 0.0 11.0 18.0 43.0 4.0 0.0 0.0 100.0 PAH 30.0 0.0 11.0 12.6 43.0 4.0 0.0 0.0 100.0 HCB 13.0 0.0 11.0 16.0 56.0 4.0 0.0 0.0 100.0 PCB 14.2 0.0 11.0 7.0 64.0 4.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM10 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 TSP 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 BC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 CO 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 As 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cr 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cu 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Ni 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Se 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Zn 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 HCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 47.4 0.0 10.1 11.0 25.1 6.4 0.0 0.0 100.0 NMVOC 53.5 0.0 10.1 10.0 20.1 6.4 0.0 0.0 100.0 SOx 33.6 0.0 10.1 12.8 39.0 5.4 0.0 0.0 100.0 NH3 36.2 0.0 10.1 20.9 27.0 6.4 0.0 0.0 100.0 PM2.5 53.1 0.0 10.1 11.4 18.1 7.6 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 47.9 0.0 11.0 11.0 25.1 4.0 0.0 0.0 100.0 NMVOC 55.0 0.0 11.0 10.0 20.0 4.0 0.0 0.0 100.0 SOx 35.0 0.0 11.0 12.0 39.0 4.0 0.0 0.0 100.0 NH3 33.0 0.0 11.0 23.9 28.0 4.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences