Technical Annual Status Report (Stage I) of CLRTAP and NECD Inventory Review for Denmark

Generated by CEIP: 22 ^th May 2017

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP and NECD inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols, and for EU Member States the Directive 2001/81/EC of the European Parliament and of the Council on national emission ceilings for certain atmospheric pollutants (NECD).

Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

§ Stage 1: An initial check of submissions for timeliness and completeness;

§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at’
within two weeks of your receiving this Status Report.

STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

§ 1a Timeliness

§ 1b Format of submission

§ 1c Completeness per sector for 2015 emissions

§ 1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

§ Emissions reported under the Convention on LRTAP.

§ Emissions reported under the NECD Directive to the European Commission and European Environment Agency.

1a TIMELINESS

Date of submission of NECD : 15.2.2017 , received within deadline 15.02.2017

Date of submission of CLRTAP : 15.2.2017 , received within deadline 15.02.2017

Informative Inventory Report (IIR) : 15.3.2017 , received within deadline 15.03.2017

1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

NECD inventory submitted in format: NFR14 (Version 2014-1) for the years 1980 to 2015; Projections for the years 2020, 2025 and 2030

CLRTAP inventory submitted in format: NFR14 (Version 2014-1) for the years 1980 to 2015; Projections for the years 2020, 2025 and 2030; Grid and LPS data for 2015

1c COMPLETENESS PER SECTOR (YEAR 2015)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2015. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated. For NECD you can see the sector completeness not only for 2015, but also for 2014 emission data.

CLRTAP (Completeness per sector for 2015):

Sector NOx NMVOC SOx NH3 PM2.5 PM10 TSP BC CO Pb Cd Hg As Cr Cu Ni Se Zn DIOX PAH HCB PCB

1A3bvi NE

2A6 NE

2B10a NE

2C1 NE NE NE NE NE NE NE NE

2C3 NE NE NE NE NE NE NE NE

2C5 NE NE NE NE NE NE

2C7c NE NE NE NE NE NE NE NE NE

2D3b NE

2D3c NE

2H1 NE NE NE NE

2K NE

3Dd NE NE NE

3De NE

5A NE NE NE NE NE NE

5B1 NE NE NE NE NE

5B2 NE NE

5C1bv NE

5C2 NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE

5D1 NE NE

5D2 NE NE

5E NE NE NE NE NE

11B NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE

11C NE NE NE NE NE NE NE

1A5c NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE

24 of 136 NFR14 Sectors listed

Count of overall notation keys 85 74 95 95 70 70 70 91 94 95 95 99 98 98 99 98 100 96 97 101 103 104

Count of 'NE' notation keys 7 9 4 10 8 8 8 10 5 3 3 7 5 6 6 6 7 4 5 10 4 4

NECD (Completeness per sector for 2015, 2010 and 2005):

2015

Sector NOx NMVOC SOx NH3 PM2.5

2A6 NE

2C1 NE NE NE

2H1 NE

3Dd NE

3De NE

5A NE NE NE

5B1 NE NE

5B2 NE NE

5C2 NE NE NE NE NE

5D1 NE NE

5D2 NE NE

5E NE

11B NE NE NE NE NE

11C NE NE NE NE

1A5c NE NE NE NE NE

15 of 136 NFR14 Sectors listed

Count of overall notation keys 85 74 95 95 70

Count of 'NE' notation keys 7 9 4 10 8

2010

Sector NOx NMVOC SOx NH3 PM2.5

2A6 NE

2C1 NE NE NE

2H1 NE

3Dd NE

3De NE

5A NE NE NE

5B1 NE NE

5B2 NE NE

5C2 NE NE NE NE NE

5D1 NE NE

5D2 NE NE

5E NE

11B NE NE NE NE NE

11C NE NE NE NE

1A5c NE NE NE NE NE

15 of 136 NFR14 Sectors listed

Count of overall notation keys 87 74 97 97 72

Count of 'NE' notation keys 7 9 4 10 8

2005

Sector NOx NMVOC SOx NH3 PM2.5

2A6 NE

2C1 NE

2H1 NE

3Dd NE

3De NE

5A NE NE NE

5B1 NE NE

5B2 NE NE

5C2 NE NE NE NE NE

5D1 NE NE

5D2 NE NE

5E NE

11B NE NE NE NE NE

11C NE NE NE NE

1A5c NE NE NE NE NE

15 of 136 NFR14 Sectors listed

Count of overall notation keys 84 74 94 97 70

Count of 'NE' notation keys 6 9 3 10 8

1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

Main Pollutants from 1990 to 2015 (NECD: 2001 to 2015)
HMs and POPs from 1990 to 2015
PMs from 2000 to 2015

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2015.

CLRTAP (Completeness of NFR Sectors from 2000 to 2015 without National Totals):

Component % Value % 0 % NO % NE % NA % IE % C % NR % All

NOx 37.2 0.0 23.7 4.0 29.4 5.0 0.0 0.0 100.0

NMVOC 45.9 0.0 24.0 6.1 16.6 7.0 0.0 0.0 100.0

SOx 27.9 0.0 22.4 2.8 40.4 4.0 0.0 0.0 99.0

NH3 29.6 0.0 23.7 7.0 36.7 4.0 0.0 0.0 100.0

PM2.5 48.1 0.0 23.7 5.0 21.2 1.0 0.0 0.0 100.0

PM10 48.1 0.0 23.7 5.0 21.2 1.0 0.0 0.0 100.0

TSP 48.1 0.0 23.7 5.0 21.2 1.0 0.0 0.0 100.0

BC 32.7 0.0 23.7 7.0 35.4 1.0 0.0 0.0 100.0

CO 30.5 0.0 24.0 3.8 38.4 4.0 0.0 0.0 100.0

Pb 29.4 0.0 24.0 2.0 42.9 1.0 0.0 0.0 100.0

Cd 29.4 0.0 24.0 2.0 42.9 1.0 0.0 0.0 100.0

Hg 26.6 0.0 24.0 4.8 42.1 2.0 0.0 0.0 100.0

As 27.4 0.0 24.0 4.0 43.4 1.0 0.0 0.0 100.0

Cr 27.4 0.0 24.0 4.0 42.9 1.0 0.0 0.0 100.0

Cu 26.6 0.0 24.0 4.0 42.9 2.0 0.0 0.0 100.0

Ni 27.4 0.0 24.0 4.0 42.9 1.0 0.0 0.0 100.0

Se 25.8 0.0 24.0 5.0 43.4 1.0 0.0 0.0 100.0

Zn 28.8 0.0 24.0 3.0 42.9 1.0 0.0 0.0 100.0

DIOX 27.9 0.0 24.0 3.8 42.9 1.0 0.0 0.0 100.0

PAH 24.9 0.0 24.0 7.0 41.2 2.0 0.0 0.0 100.0

HCB 24.0 0.0 24.0 3.0 47.6 1.0 0.0 0.0 100.0

PCB 23.3 0.0 24.0 3.0 48.3 1.0 0.0 0.0 100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences

CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component % Value % 0 % NO % NE % NA % IE % C % NR % All

NOx 39.0 0.0 23.0 4.0 29.0 5.0 0.0 0.0 100.0

NMVOC 46.0 0.0 24.0 6.0 17.0 7.0 0.0 0.0 100.0

SOx 30.0 0.0 22.0 2.0 40.0 4.0 0.0 0.0 99.0

NH3 30.0 0.0 23.0 7.0 37.0 4.0 0.0 0.0 100.0

CO 32.0 0.0 24.0 3.0 38.0 4.0 0.0 0.0 100.0

Pb 30.0 0.0 24.0 2.0 42.0 1.0 0.0 0.0 100.0

Cd 30.0 0.0 24.0 2.0 42.0 1.0 0.0 0.0 100.0

Hg 28.0 0.0 24.0 4.0 41.0 2.0 0.0 0.0 100.0

As 28.0 0.0 24.0 4.0 43.0 1.0 0.0 0.0 100.0

Cr 28.0 0.0 24.0 4.0 42.0 1.0 0.0 0.0 100.0

Cu 28.0 0.0 24.0 4.0 42.0 2.0 0.0 0.0 100.0

Ni 28.0 0.0 24.0 4.0 42.0 1.0 0.0 0.0 100.0

Se 27.0 0.0 24.0 5.0 43.0 1.0 0.0 0.0 100.0

Zn 30.0 0.0 24.0 3.0 42.0 1.0 0.0 0.0 100.0

DIOX 30.0 0.0 24.0 3.0 42.0 1.0 0.0 0.0 100.0

PAH 27.0 0.0 24.0 7.0 41.0 2.0 0.0 0.0 100.0

HCB 24.0 0.0 24.0 3.0 48.0 1.0 0.0 0.0 100.0

PCB 23.0 0.0 24.0 3.0 49.0 1.0 0.0 0.0 100.0

CLRTAP (Completeness of National Totals from 1990 to 2015 including NFR and SNAP):

Component % Value % 0 % NO % NE % NA % IE % C % NR % All

NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

PM10 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

TSP 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

BC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

CO 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

As 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Cr 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Cu 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Ni 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Se 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

Zn 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

HCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

PCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0

-------------