Technical Annual Status Report (Stage I) of CLRTAP and NECD Inventory Review for Germany

Generated by CEIP: 19 th March 2019

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP and NECD inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols, and for EU Member States the Directive 2001/81/EC of the European Parliament and of the Council on national emission ceilings for certain atmospheric pollutants (NECD).


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

§ Stage 1: An initial check of submissions for timeliness and completeness;

§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

§ 1a Timeliness

§ 1b Format of submission

§ 1c Completeness per sector for 2017 emissions

§ 1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

§ Emissions reported under the Convention on LRTAP.

§ Emissions reported under the NECD Directive to the European Commission and European Environment Agency.


1a TIMELINESS

Date of submission of NECD : 12.02.2019 , received within deadline 15.02.2019 (Resubmission: 12.03.2019)

Date of submission of CLRTAP : 12.02.2019 , received within deadline 15.02.2019

Date of resubmission of CLRTAP : 12.03.2019 , received within deadline 15.03.2019


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

NECD inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2017

CLRTAP inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2017


1c COMPLETENESS PER SECTOR (YEAR 2017)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2017. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated. For NECD you can see the sector completeness not only for 2017, but also for 2010 and 2005 emission data.


CLRTAP (Completeness per sector for 2017):

SectorNOxNMVOCSOxNH3PM2.5PM10TSPBCCOPbCdHgAsCrCuNiSeZnDIOXPAHHCBPCB
                       
1A1b                    NENE
1A1c                NE   NENE
1A2a       NE NENE NENENENENENE    
1A2b       NE NENENENENENENENENENENE  
1A2e       NE NENENENENENENENENENENE  
1A2gvii                    NENE
1A3ai(i)         NENENENENENENENENENENENENE
1A3aii(i)                  NE NENE
1A3bi                    NENE
1A3bii                    NENE
1A3biii                    NENE
1A3biv                    NENE
1A3bvii       NE   NE    NE     
1A3c                    NENE
1A3ei       NE              
1A4ai                NE     
1A4aii                    NENE
1A4bi                NE     
1A4bii                    NENE
1A4ci                NE     
1A4cii                    NENE
1A5a         NENE NENENENENENE    
2A1       NE              
2A2       NE              
2B10b       NE              
2B3NE   NENENENENE             
2B6NE       NE             
2B7    NENE NE              
2C1       NE              
2C2NENENE    NENENENENE          
2C3 NE     NE              
2C4 NE  NENENENE NENENENENENENENENENENE  
2C5       NE              
2C6       NE              
2C7a       NE             NE
2C7c  NE    NE              
2C7d       NE              
2D3b       NE           NE  
2D3c                   NE  
2D3h        NENENENENENENENENENENENENENE
2H1       NENE            NE
2H2       NE              
2H3       NE              
2I       NE              
2JNENENENENENENENENE           NENE
2K       NE NENENENENENENENENE  NENE
2L       NE              
3B4hNENE NENENENE               
5A       NE              
5B1       NE              
5B2       NE              
5C1bv       NE    NENENENENENE    
5C2 NE NE     NENENENENENENENENENE NENE
                       
1A3ai(ii)         NENENENENENENENENENENENENE
1A3aii(ii)         NENENENENENENENENENENENENE
1A5cNENENENENENENENENENENENENENENENENENENENENENE
                       
56 of 136 NFR14 Sectors listed                      
Count of overall notation keys7466877868686710395103103100107109107109116108103105123121
Count of 'NE' notation keys674466532713131213131313181310102022


NECD (Completeness per sector for 2017, 2010 and 2005):

2017

SectorNOxNMVOCSOxNH3
     
2B3NE   
2B6NE   
2C2NENENE 
2C3 NE  
2C4 NE  
2C7c  NE 
2JNENENENE
3B4hNENE NE
5C2 NE NE
     
1A5cNENENENE
     
10 of 136 NFR14 Sectors listed    
Count of overall notation keys74668778
Count of 'NE' notation keys6744

2010

SectorNOxNMVOCSOxNH3
     
2B3NE   
2B6NE   
2C2NENENE 
2C3 NE  
2C4 NE  
2C7c  NE 
2JNENENENE
3B4hNENE NE
5C2 NE NE
     
1A5cNENENENE
     
10 of 136 NFR14 Sectors listed    
Count of overall notation keys74668778
Count of 'NE' notation keys6744

2005

SectorNOxNMVOCSOxNH3
     
2B3NE   
2B6NE   
2C2NENENE 
2C3 NE  
2C4 NE  
2C7c  NE 
2JNENENENE
3B4hNENE NE
5C2 NE NE
     
1A5cNENENENE
     
10 of 136 NFR14 Sectors listed    
Count of overall notation keys74668778
Count of 'NE' notation keys6744


1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2017.


CLRTAP (Completeness of NFR Sectors from 2000 to 2017 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx46.00.07.04.038.04.00.01.0100.0
NMVOC51.40.07.05.031.04.60.01.0100.0
SOx36.00.07.03.050.03.01.01.0100.0
NH343.00.07.03.042.04.00.01.0100.0
PM2.550.00.07.04.030.08.00.01.0100.0
PM1050.00.07.04.030.08.00.01.0100.0
TSP51.00.07.04.030.08.00.01.0100.0
BC24.00.07.024.041.04.00.01.0100.0
CO30.00.07.05.050.07.00.01.0100.0
Pb24.00.07.010.056.03.00.01.0100.0
Cd24.00.07.010.056.03.00.01.0100.0
Hg27.00.07.09.054.03.00.01.0100.0
As21.00.07.010.059.02.00.01.0100.0
Cr20.00.07.010.061.02.00.01.0100.0
Cu21.00.07.010.059.02.00.01.0100.0
Ni20.00.07.010.061.02.00.01.0100.0
Se15.70.07.013.062.02.00.01.0100.0
Zn21.00.07.010.060.02.00.01.0100.0
DIOX24.00.07.07.059.02.00.01.0100.0
PAH23.00.07.07.060.02.00.01.0100.0
HCB10.10.07.014.365.92.00.01.0100.0
PCB11.00.07.016.063.02.00.01.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx46.00.07.04.238.04.00.01.0100.0
NMVOC50.00.07.05.232.05.40.01.0100.0
SOx36.10.07.03.249.42.91.01.0100.0
NH341.70.07.03.242.84.00.01.0100.0
CO30.00.06.85.250.07.00.01.0100.0
Pb24.00.06.810.056.03.00.01.0100.0
Cd24.00.06.810.056.03.00.01.0100.0
Hg27.00.06.89.254.03.00.01.0100.0
As21.00.06.810.059.02.00.01.0100.0
Cr20.00.06.810.061.02.00.01.0100.0
Cu21.00.06.810.059.02.00.01.0100.0
Ni20.00.06.810.061.02.00.01.0100.0
Se16.00.06.813.062.02.00.01.0100.0
Zn21.00.06.810.060.02.00.01.0100.0
DIOX24.00.06.87.259.02.00.01.0100.0
PAH23.00.06.87.260.02.00.01.0100.0
HCB11.00.06.814.265.02.00.01.0100.0
PCB11.20.06.816.363.02.00.01.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of National Totals from 1990 to 2017 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0
PM2.5100.00.00.00.00.00.00.00.0100.0
PM10100.00.00.00.00.00.00.00.0100.0
TSP100.00.00.00.00.00.00.00.0100.0
BC100.00.00.00.00.00.00.00.0100.0
CO100.00.00.00.00.00.00.00.0100.0
Pb100.00.00.00.00.00.00.00.0100.0
Cd100.00.00.00.00.00.00.00.0100.0
Hg100.00.00.00.00.00.00.00.0100.0
As100.00.00.00.00.00.00.00.0100.0
Cr100.00.00.00.00.00.00.00.0100.0
Cu100.00.00.00.00.00.00.00.0100.0
Ni100.00.00.00.00.00.00.00.0100.0
Se100.00.00.00.00.00.00.00.0100.0
Zn100.00.00.00.00.00.00.00.0100.0
DIOX100.00.00.00.00.00.00.00.0100.0
PAH100.00.00.00.00.00.00.00.0100.0
HCB100.00.00.00.00.00.00.00.0100.0
PCB100.00.00.00.00.00.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences



-------------

NECD (Completeness of NFR Sectors from 2000 to 2017 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx46.00.07.04.038.04.00.01.0100.0
NMVOC51.40.07.05.031.04.60.01.0100.0
SOx36.00.07.03.050.03.01.01.0100.0
NH343.00.07.03.042.04.00.01.0100.0
PM2.550.00.07.04.030.08.00.01.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


NECD (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx46.00.07.04.238.04.00.01.0100.0
NMVOC50.00.07.05.232.05.40.01.0100.0
SOx36.10.07.03.249.42.91.01.0100.0
NH341.70.07.03.242.84.00.01.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


NECD (Completeness of National Totals from 1990 to 2017):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0
PM2.5100.00.00.00.00.00.00.00.0100.0

"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences