Generated by CEIP: 4 th April 2011
This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP and NECD inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols, and for EU Member States the Directive 2001/81/EC of the European Parliament and of the Council on national emission ceilings for certain atmospheric pollutants (NECD).
The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.
The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).
§ Stage 1: An initial check of submissions for timeliness and completeness;
§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;
§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.
If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at’
within two weeks of your receiving this Status Report.
STAGE I REVIEW TESTS
This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:
§ 1a Timeliness
§ 1b Format of submission
§ 1c Completeness per sector for 2009 emissions
§ 1d Completeness per pollutant of your data in the WebDab database
Data included in tests:
§ Emissions reported under the Convention on LRTAP.
§ Emissions reported under the NECD Directive to the European Commission and European Environment Agency.
Date of submission of NECD : 21.12.2010 , received within deadline 31.12.2010
Date of submission of CLRTAP : 15.2.2011 , received within deadline 15.02.2011
Informative Inventory Report (IIR): Received
Parties are invited to check consistency of the format via RepDab ( http://www.ceip.at/repdab-check-your-inventory/ ) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting (NFR or Flat-file) and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data.
NECD inventory submitted in format: NFR09 (Version 2009-1) for the years 2008 and 2009
CLRTAP inventory submitted in format: NFR09 (Version 2009-1) for the year 2009
NE in the tables below shows for which sectors you have reported 'Not Estimated' in the 2009 emission data (also the associated sectors are coloured). Sectors where you have reported only notation keys are listed as well, but without colouring. There are only priority pollutants included in this analysis. At the end of the table you can see a statistic of how many sectors are listed and the number of reported 'NE' notation keys per pollutant. For NECD you can see the sector completeness not only for 2009, but also for 2008 emission data.
Sector NOx NMVOC SOx NH3 PM2.5 PM10 TSP CO Pb Cd Hg DIOX PAH HCB HCH PCB 1 A 3 b i NE NA 1 A 3 b ii IE IE IE IE IE IE IE IE IE IE IE IE IE NE NA IE 1 A 3 b iii NE NA 1 A 3 b iv NE NA 1 A 3 b v NA NE NA NA NA NA NA NA NA NA NA NA NE NA 1 A 3 b vi NA NA NA NA NA NA NE NA 1 A 3 b vii NA NA NA NA NA NA NE NA 1 A 3 d i (ii) NO NO NO NO NO NO NO NO NO NO NO NO NE NA NO 1 A 3 d ii NE NA 1 A 3 e NE NA 1 A 4 a ii NE NA NA 1 A 4 b ii NE NA NA 1 A 4 c ii NE NA 1 A 4 c iii NE NA NA 1 A 5 a NE NA NA 1 A 5 b NE NA NA 1 B 3 NE NA 2 A 1 NA NE NA 2 A 5 NA NA NA NE NA NA 2 A 6 NA NA NA NA NE NA NA 2 A 7 d NE NA NA 2 B 4 NA NE NA NA 2 B 5 a NE NA 2 B 5 b NE NA 2 C 1 NE NA 2 C 2 NE NA 2 C 3 NE NA NA 2 C 5 a NE NA 2 C 5 b NE NA 2 C 5 c NE NA 2 C 5 d NE NA 2 C 5 e NE NA 2 C 5 f NE NA 2 D 1 NA NA NA NA NE NA 2 E NA NA NA NA NA NE NA 2 F NA NA NA NA NA NA NA NA NA NA NE NA 2 G NE NA 3 C NE NA 3 D 3 NE NA 4 B 4 NA NE NA 4 G NE NA 6 A NA NA NA NA NA NE NA NA NA NA NA 6 C e NE NA 6 D NE NA 7 A NE NA 1 A 3 d i (i) NO NO NO NO NO NO NO NO NO NO NO NO NO NA NA NA 11 A NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 11 B NE NE NE NE NE NE NE NE NE NE NE NE NE NE NA NA 48 of 117 NFR09 Sectors listed Count of 'NE' sectors per pollutant 1 2 1 1 1 1 1 1 1 1 2 1 1 45 0 0
2009
|
2008
|
The completeness of your data in the WebDab database of priority pollutants has been evaluated on the basis of the criteria outlined in 2009 Guidelines for Estimating and Reporting Emission Data under CLRTAP (ECE/EB.AIR/97):
All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in three sections: 1980 to 1989, 1990 to 1999 and 2000 to 2009.
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 70.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 70.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 66.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 66.7 PM2.5 70.0 10.0 0.0 10.0 0.0 0.0 0.0 0.0 90.0 PM10 90.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 90.0 TSP 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 CO 93.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 HCB 40.0 5.0 0.0 0.0 0.0 0.0 0.0 0.0 45.0 HCH 0.0 35.0 0.0 0.0 10.0 0.0 0.0 0.0 45.0 PCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 NMVOC 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 SOx 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 NH3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 CO 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 NMVOC 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 SOx 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 NH3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 CO 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Pb 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Cd 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Hg 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 DIOX 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 PAH 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 HCB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 HCH 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 PCB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 30.3 10.2 5.3 8.5 19.0 0.6 0.0 0.0 74.0 NMVOC 37.4 10.5 4.2 9.3 11.6 0.6 0.0 0.0 73.8 SOx 29.7 8.5 5.3 8.0 21.6 0.6 0.0 0.0 73.7 NH3 23.4 15.7 9.2 7.5 16.7 0.6 0.0 0.0 73.4 PM2.5 28.0 14.5 5.7 17.3 7.4 0.5 0.0 0.0 73.5 PM10 33.5 14.2 5.3 12.3 7.4 0.6 0.0 0.0 73.4 TSP 34.0 14.0 5.4 12.2 7.2 0.6 0.0 0.0 73.5 CO 29.6 7.0 5.3 7.5 23.7 0.6 0.0 0.0 74.0 Pb 16.8 14.8 5.7 7.8 28.6 0.6 0.0 0.0 74.6 Cd 21.6 9.7 5.7 7.4 29.3 0.6 0.0 0.0 74.8 Hg 12.9 18.4 5.7 8.2 28.3 0.6 0.0 0.0 74.8 DIOX 19.3 13.0 6.2 7.7 26.6 0.6 0.0 0.0 74.0 PAH 22.0 9.3 5.8 8.5 28.1 0.6 0.0 0.0 74.7 HCB 12.9 4.6 5.0 17.1 35.5 0.1 0.0 0.0 75.3 HCH 0.0 2.9 10.7 0.3 61.5 0.0 0.0 0.0 75.4 PCB 15.6 9.4 4.9 2.9 42.7 0.5 0.0 0.0 75.8
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 66.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 66.7 NMVOC 66.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 66.7 SOx 66.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 66.7 NH3 66.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 66.7
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 23.3 8.1 2.9 1.4 21.4 1.1 0.0 1.7 60.3 NMVOC 28.2 8.6 2.9 2.3 13.6 1.9 0.0 1.7 59.4 SOx 22.8 8.7 2.9 1.4 21.0 1.1 0.0 1.8 59.8 NH3 18.2 16.6 2.9 1.4 16.4 1.1 0.0 1.9 58.8
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences