Generated by CEIP: 26 th March 2020
This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols.
The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.
The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).
§ Stage 1: An initial check of submissions for timeliness and completeness;
§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;
§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.
If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at’
within two weeks of your receiving this Status Report.
STAGE I REVIEW TESTS
This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:
§ 1a Timeliness
§ 1b Format of submission
§ 1c Completeness per sector for 2017 emissions
§ 1d Completeness per pollutant of your data in the WebDab database
Data included in tests:
§ Emissions reported under the Convention on LRTAP.
Date of submission of CLRTAP : 14.02.2020 , received within deadline 15.02.2020
Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).
CLRTAP inventory submitted in format: NFR19 (Version 2019-1) for the years 1990 to 2018; Projections for 2020, 2025 and 2030
The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2018. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated.
Sector NOx NMVOC SOx NH3 PM2.5 PM10 TSP BC CO Pb Cd Hg As Cr Cu Ni Se Zn DIOX PAH HCB PCB 3B1a NE 3B1b NE 3B2 NE 3B3 NE 3B4a NE 3B4d NE 3B4e NE 3B4f NE NE NE NE 3B4gi NE 3B4gii NE 3B4giii NE 3B4giv NE NE NE NE NE NE 3B4h NE 3Da2a NE NE NE 3Da2c NE 3Da4 NE 3F NE NE NE NE NE NE NE NE NE NE NE NE 1A5c NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 18 of 135 Sectors listed Count of overall notation keys 81 61 81 77 57 57 57 117 80 98 103 100 144 144 144 144 144 144 106 99 119 144 Count of 'NE' notation keys 15 3 2 5 5 5 5 1 2 2 2 2 1 1 1 1 1 1 1 2 1 0
The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):
All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2018.
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 47.4 0.0 1.9 11.1 27.4 12.5 0.0 0.0 100.0 NMVOC 62.7 0.0 1.9 2.0 19.8 13.5 0.0 0.0 100.0 SOx 47.8 0.0 1.9 1.1 37.7 12.0 0.0 0.0 100.0 NH3 54.3 0.0 1.9 3.1 26.4 13.9 0.0 0.0 100.0 PM2.5 66.2 0.0 1.9 3.1 16.8 12.5 0.0 0.0 100.0 PM10 66.2 0.0 1.9 3.1 16.8 12.5 0.0 0.0 100.0 TSP 66.2 0.0 1.9 3.1 16.8 12.5 0.0 0.0 100.0 BC 6.6 0.0 0.0 0.0 92.7 0.6 0.0 0.0 100.0 CO 48.7 0.0 1.9 1.1 37.3 11.5 0.0 0.0 100.0 Pb 35.1 0.0 1.9 1.1 51.8 10.1 0.0 0.0 100.0 Cd 31.4 0.0 1.9 1.1 55.1 10.2 0.0 0.0 100.0 Hg 36.9 0.0 1.9 1.1 50.3 10.0 0.0 0.0 100.0 As 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Cr 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Cu 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Ni 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Se 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Zn 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 DIOX 29.7 0.0 1.9 0.1 59.9 8.6 0.0 0.0 100.0 PAH 30.2 0.0 1.9 4.9 53.7 9.2 0.0 0.0 100.0 HCB 20.1 0.0 1.9 0.1 70.1 8.1 0.0 0.0 100.0 PCB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 49.0 0.0 1.0 12.0 26.0 13.0 0.0 0.0 100.0 NMVOC 62.0 0.0 1.0 2.0 20.0 14.0 0.0 0.0 100.0 SOx 49.5 0.0 1.0 2.0 36.5 12.0 0.0 0.0 100.0 NH3 59.9 0.0 1.0 4.0 21.1 14.0 0.0 0.0 100.0 CO 50.0 0.0 1.0 2.0 35.2 12.0 0.0 0.0 100.0 Pb 30.3 0.0 1.0 2.0 55.7 11.1 0.0 0.0 100.0 Cd 28.3 0.0 1.0 2.0 58.0 11.1 0.0 0.0 100.0 Hg 36.8 0.0 1.0 2.0 50.1 10.1 0.0 0.0 100.0 As 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Cr 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Cu 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Ni 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Se 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Zn 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 DIOX 27.8 0.0 1.0 1.0 62.2 9.0 0.0 0.0 100.0 PAH 28.5 0.0 1.0 6.0 56.0 9.0 0.0 0.0 100.0 HCB 18.7 0.0 1.0 1.0 71.3 9.0 0.0 0.0 100.0 PCB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM10 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 TSP 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 BC 31.6 0.0 0.0 0.0 68.4 0.0 0.0 0.0 100.0 CO 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 As 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Cr 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Cu 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Ni 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Se 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 Zn 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0 DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 HCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PCB 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences