Generated by CEIP: 6 th May 2021
This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP and NECD inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols, and for EU Member States the Directive 2001/81/EC of the European Parliament and of the Council on national emission ceilings for certain atmospheric pollutants (NECD).
The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.
The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).
§ Stage 1: An initial check of submissions for timeliness and completeness;
§ Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;
§ Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.
If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at ‘emep.emissions@umweltbundesamt.at’
within two weeks of your receiving this Status Report.
STAGE I REVIEW TESTS
This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:
§ 1a Timeliness
§ 1b Format of submission
§ 1c Completeness per sector for 2019 emissions
§ 1d Completeness per pollutant of your data in the WebDab database
Data included in tests:
§ Emissions reported under the Convention on LRTAP.
§ Emissions reported under the NECD Directive to the European Commission and European Environment Agency.
Date of submission of NECD : 15.02.2021 , received within deadline 15.02.2021 (Resubmission: 08.03.2021)
Date of submission of CLRTAP : 15.02.2021 , received within deadline 15.02.2021
Date of resubmission of CLRTAP : 08.03.2021 , received within deadline 15.03.2021
Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR19. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).
NECD inventory submitted in format: NFR19 (Version 2019-1) for the years 1990 to 2019; Projections from the years 2020, 2025 and 2030; Gridded emissions and LPS for the year 2019
CLRTAP inventory submitted in format: NFR19 (Version 2019-1) for the years 1990 to 2019; Projections from the years 2020, 2025 and 2030; Gridded emissions and LPS for the year 2019
The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2019. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated. For NECD you can see the sector completeness not only for 2019, but also for 2010 and 2005 emission data.
Sector NOx NMVOC SOx NH3 PM2.5 PM10 TSP BC CO Pb Cd Hg As Cr Cu Ni Se Zn DIOX PAH HCB PCB 1A1b NE NE 1A2b NE 1A2gvii NE 1A3ai(i) NE NE 1A3aii(i) NE NE 1A3bvi NE NE NE NE NE 1A3bvi(fu) NE NE NE 1A3bvii NE NE NE NE NE NE NE NE NE NE NE 1A3bvii(fu) NE NE NE NE NE NE NE NE NE NE NE 1A3di(ii) NE NE 1A3ei NE 1A3eii NE NE NE 1A4bii NE NE NE 1A4ciii NE NE 1A5a NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 1A5b NE NE NE 1B1b NE NE NE 1B2aiv NE NE NE 1B2c NE 1B2d NE NE 2A6 NE NE NE NE 2B1 NE NE 2B10a NE 2B10b NE NE NE NE NE NE NE NE NE NE NE 2B2 NE NE 2B6 NE 2C1 NE 2C2 NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 2C3 NE NE NE NE NE NE 2C4 NE NE NE 2C5 NE 2C6 NE NE 2C7a NE 2C7b NE NE 2C7c NE NE 2C7d NE NE NE NE NE NE 2D3c NE NE NE NE NE NE NE NE NE NE 2D3d NE NE NE NE NE NE NE NE NE 2D3e NE NE NE NE NE NE NE NE NE NE NE 2D3g NE NE NE NE NE NE NE NE NE NE 2D3h NE NE 2H1 NE NE NE NE NE NE NE NE NE NE NE NE 2H2 NE NE NE 2H3 NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 2I NE NE NE NE NE NE NE NE NE 2J NE NE NE 2K NE NE NE NE NE NE NE NE NE NE NE NE 2L NE NE NE NE NE NE NE NE NE 3Dd NE NE NE 3I NE 5A NE NE NE NE 5B1 NE NE NE NE NE NE 5C1bi NE NE NE 5C1bii NE 5C1biii NE NE 5C1biv NE 5C1bv NE NE 5C1bvi NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE NE 5C2 NE NE NE 5D1 NE 5D2 NE NE NE 5D3 NE NE NE NE NE 5E NE NE NE 1A3ai(ii) NE NE 1A3aii(ii) NE NE 1A3di(i) NE NE 66 of 135 Sectors listed Count of overall notation keys 66 62 85 82 70 70 70 86 81 90 91 98 94 93 91 91 94 91 101 94 121 115 Count of 'NE' notation keys 12 9 15 27 7 7 7 9 14 15 14 24 17 17 14 15 17 11 20 25 11 12
|
2019
|
2010
|
2005
|
The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):
All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2019.
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 55.9 0.0 7.0 8.7 17.0 12.1 0.0 0.0 100.0 NMVOC 58.0 0.0 7.0 6.2 16.0 12.8 0.0 0.0 100.0 SOx 42.5 0.0 7.0 9.3 31.0 9.2 0.0 0.0 100.0 NH3 44.9 0.0 7.0 18.4 18.2 11.6 0.0 0.0 100.0 PM2.5 50.6 0.0 7.0 6.0 21.2 15.4 0.0 0.0 100.0 PM10 50.6 0.0 7.2 6.0 21.1 15.4 0.0 0.0 100.0 TSP 50.6 0.0 7.2 6.0 21.1 15.4 0.0 0.0 100.0 BC 38.6 0.0 7.2 7.0 35.0 12.7 0.0 0.0 100.0 CO 43.9 0.0 7.2 10.3 29.1 9.2 0.0 0.0 100.0 Pb 36.0 0.0 7.2 11.0 37.0 8.8 0.0 0.0 100.0 Cd 35.8 0.0 7.2 9.2 39.0 8.8 0.0 0.0 100.0 Hg 30.9 0.0 7.2 16.9 37.0 8.2 0.0 0.0 100.0 As 32.7 0.0 7.2 12.8 39.0 8.2 0.0 0.0 100.0 Cr 34.1 0.0 7.2 12.4 39.0 8.1 0.0 0.0 100.0 Cu 34.9 0.0 7.2 10.1 39.0 8.8 0.0 0.0 100.0 Ni 35.0 0.0 7.2 10.8 39.0 8.7 0.0 0.0 100.0 Se 32.9 0.0 7.2 12.7 41.0 6.2 0.0 0.0 100.0 Zn 34.4 0.0 7.2 8.6 41.0 8.9 0.0 0.0 100.0 DIOX 31.1 0.0 7.2 13.0 42.0 7.0 0.0 0.0 100.0 PAH 32.9 0.0 7.0 19.7 39.0 1.2 0.0 0.0 100.0 HCB 13.5 0.0 7.0 7.3 68.0 4.2 0.0 0.0 100.0 PCB 17.7 0.0 7.0 8.7 66.3 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 56.7 0.0 6.0 10.3 17.0 10.2 0.0 0.0 100.0 NMVOC 59.2 0.0 6.0 7.8 16.2 11.0 0.0 0.0 100.0 SOx 44.9 0.0 6.0 9.1 31.2 8.2 0.0 0.0 100.0 NH3 41.9 0.0 6.0 22.8 18.2 10.9 0.0 0.0 100.0 CO 45.6 0.0 6.0 10.9 29.2 8.2 0.0 0.0 100.0 Pb 40.8 0.0 6.6 7.6 37.6 7.9 0.0 0.0 100.0 Cd 36.2 0.0 6.6 10.3 39.2 8.0 0.0 0.0 100.0 Hg 34.3 0.0 6.6 15.0 37.5 6.1 0.0 0.0 100.0 As 32.7 0.0 6.6 13.4 39.6 7.2 0.0 0.0 100.0 Cr 34.7 0.0 6.6 12.8 39.2 6.5 0.0 0.0 100.0 Cu 35.8 0.0 6.6 10.7 39.2 8.0 0.0 0.0 100.0 Ni 33.9 0.0 6.6 16.8 39.2 3.8 0.0 0.0 100.0 Se 32.5 0.0 6.6 14.9 41.6 4.6 0.0 0.0 100.0 Zn 33.2 0.0 6.6 10.6 41.6 8.2 0.0 0.0 100.0 DIOX 33.0 0.0 6.6 13.0 42.4 6.0 0.0 0.0 100.0 PAH 32.8 0.0 6.6 20.0 39.6 1.0 0.0 0.0 100.0 HCB 15.6 0.0 6.6 8.0 68.4 2.0 0.0 0.0 100.0 PCB 17.5 0.0 6.6 9.0 67.1 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM10 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 TSP 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 BC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 CO 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Pb 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cd 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Hg 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 As 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cr 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Cu 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Ni 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Se 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 Zn 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 DIOX 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PAH 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 HCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PCB 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 55.9 0.0 7.0 8.7 17.0 12.1 0.0 0.0 100.0 NMVOC 58.0 0.0 7.0 6.2 16.0 12.8 0.0 0.0 100.0 SOx 42.5 0.0 7.0 9.3 31.0 9.2 0.0 0.0 100.0 NH3 44.9 0.0 7.0 18.4 18.2 11.6 0.0 0.0 100.0 PM2.5 50.6 0.0 7.0 6.0 21.2 15.4 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 56.7 0.0 6.0 10.3 17.0 10.2 0.0 0.0 100.0 NMVOC 59.2 0.0 6.0 7.8 16.2 11.0 0.0 0.0 100.0 SOx 44.9 0.0 6.0 9.1 31.2 8.2 0.0 0.0 100.0 NH3 41.9 0.0 6.0 22.8 18.2 10.9 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences
Component % Value % 0 % NO % NE % NA % IE % C % NR % All NOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NMVOC 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 SOx 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 NH3 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0 PM2.5 100.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 100.0
"Value" – the cell contains a number > 0.005;
"0" – the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences